LIGHTWEIGHT HARDWARE KIT FOR SPRINT CAR CAGE

Item #: 3429


LIGHTWEIGHT HARDWARE KIT FOR SPRINT CAR CAGE
Quantity:

#3429 Lightweight Cage Hardware Kit Lightening the top wing and cage on your sprint car is and easy way to get your car down to the minimum weight limit and lower the center of gravity of your car. This can be beneficial to limit the amount of chassis roll on very high grip tracks. Use the following tips to make your cage and wing even lighter! 1. Hardware: The included aluminum screws will take 11 grams (1/3 ounce) out of the cage. See the diagram on the reverse side to determine which screws to change . 2. Vinyl wraps: Customizable vinyl wraps can make your sprint car look great. However there is a cost as the weight of the vinyl material can add up. Ask your wrap supplier if they can print on a thinner material (2 mil thick as opposed to 3 mil). Also we never recommend wrapping the center section of the wing since it is the largest area on the car and very high above the roll center. Preferably just use vinyl numbers for the wing or just wrap the side panels at the most. 3. Paint: If you are using paint instead of a wrap it is not necessary to apply enough paint to completely block light out. A few light coats are enough to show the color when the car is on the track.



Inventory Status: Available







Company

About Us

Support

customworkssales@aol.com
704-489-8147

Connect with us

Copyright © 2016 CustomworksRC